1. This series is double-side automatic crimping machine for bulk terminals. The terminals are automatically fed through the vibrating plate. This machine can cut the wire to a fixed length, strip and twist the wire at both ends, and crimp the terminal. For the closed terminal, the function of rotating and twisting the wire can also be added. Twist the copper wire and then insert it into the inner hole of the terminal for crimpinq, which can effectively prevent the reverse wire phenomenon.
2. The wire inlet is equipped with 3 sets of straighteners, which can automatically straighten the wire and improve the stability of the machine operation. Multiple sets of wire feeding wheels can jointly feed the wire to prevent the wire from slipping and improve the wire feeding accuracy. The terminal machine is integrally formed with nodular cast iron, the whole machine has strong rigidity and the crimping size is stable. The default crimping stroke is 30mm, and the standard OTP bayonet mold is used. ln addition, a model with a stroke of 40mm can also be customized, and various European molds can be used. lt can also be equipped with a terminal pressure monitor to monitor the pressure curve changes of each crimping process in real time, and automatically alarm and stop when the pressure is abnormal.
| Model | SA-STY200 |
| Function | wire cutting, single or double ends stripping, single or double ends crimping, single or double ends twisting. Stripping length/twisting parameters/crimping position can be set and adjusted. |
| Wire specifications | #24~#10AWG |
| Production capacity | 900 pieces/hour(depending on material specifications and length) |
| Accuracy | length＜100mm, the error is 0.2+(length x0.002) |
| length＞100mm, the error is 0.5+ (length x 0.002) | |
| Length | leave rubber in the middle ≥ 40mm (can be shortened by modification) |
| Stripping length | front end 0.1~15mm; rear end 0.1~15mm |
| Detecting items | low air pressure detection, wire presence detection, incoming wire abnormality detection, crimping abnormality detection |
| Power supply | AC200V~250V 50/60Hz 10A |
| Air source | 0.5-0.7MPa (5-7kgf/cm2) clean and dry air |
| Dimensions | W 1220 *D1000*H1560 mm (excluding accessories such as terminal rods, terminal plates, extension boards, etc.) |
| Weight | about 550Kg |