Home Categories Send inquiry

Multi core cutting and stripping machine

Product Video

Product Introduction

SA-810NP is automatic cutting and stripping machine for sheathed cable.

Processing wire range: 0.1-10mm² single wire and 7.5 outer diameter of sheathed cable , This machine adopts the belt feeding, compared with the wheel feeding feeding more accurate and does not hurt the wire. Turn on the inner core stripping function, you can strip the outer sheath and core wire at the same time. Can also be closed to deal with electronic wire below 10mm2, this machine has a lifting belt function, so the outer skin stripping length of the front can be up to 0-500mm, the back end of the 0-90mm, the inner core stripping length of 0-30mm.

The machine is fully electric, and the stripping and cutting action are driven by stepping motor,not need additional air supply . However, we considering that the waste insulation may fall onto the blade and affect the working accuracy. So we think It is necessary to add an air blowing function next to the blades, which can automatically clean the blades’s waste when connected to the air supply,This greatly improves the stripping effect.

 

Advantage

1. English Color Screen: Easy to operate , Directly setting cutting length and stripping length .

2. High speed :1300pcs/hour;It’s Greatly Improved stripping speed and save labor cost .

3. Motor: Copper core stepper motor with high precision, low noise and longer service life.

4. This machine adopts the belt feeding, compared with the wheel feeding feeding more accurate and does not hurt the wire

Product Parameters

Model SA-810NP ( belt feeding )
Product Name  Multi core cutting and stripping machine
electronic wire/ single wire 0.1-10mm2
Sheathed cable Outer diameter is less 7.5mm
Stripping length Outer jacketer  Front end 0-500mm Rear end 0-90mm
Stripping length Inner core 0-30MM
Conduit 4/5/6/8
Power supply 220V~50-60Hz ( 110V can custom made )
Operation page 4.3-inch touch screen display
Capacity About 1300 Pcs /hour (depending on the Cutting length )
Cutting tolerance 0.002*L-MM( No error within 1M)
Dimension L460mm*W480mm*H330mm (excluding protrusions
Weight 35kg