SA-ZX830-SL
1.Full automatic wire stripping tinning machine. The machine uses touch screen Chinese and English interface,and knife port size, wire cutting length, stripping length, wires twisting tightness, forward and reverse twisting wire, tin flux dipping depth, tin dipping depth,all adopt digital control and can be set directly on the touch screen.
2.Mitsubishi servo motors are used to control the front and rear end rotation and tin dipping. The tool holder is controlled by Mitsubishi servo with precision screw and double guide rail device. The front and rear end stripping is controlled by Mitsubishi servo with precision screw and double guide rail device.
3.All built-in circuits are equipped with abnormal signal monitoring indicators, which make troubleshooting clear at a glance and easy to troubleshoot.
4.Long ro short wire processing switching doesn't require the replacement of the rear stripping clamp, enabling instant replacement.
5.The ultra-wide knife edge is beneficial to protecting the core wires; the ultra-large rubber leakage port is equipped with an air blowing device for blowing rubber to further ensure that the rubber is collected cleanly.
6. A motor is used to rotate the tin scraper to avoid air pressure interference; the heater adopts a hot runner device.
7. It is equipped with a smoke recovery device to keep the machine in a clean working environment; there are pipeline recovery devices for rosin water, tin slag, tin ash, etc.; the machine accessories are made of anti-corrosion materials to avoid corrosion; the machine has low noise, high precision and longer service life.
| Model | SA-ZX830-SL | SA-ZX830-HC |
| Function | Wire cutting, single and double end half stripping and full stripping, single and double end twisting, single end tinning, double end tinning | Wire cutting, single and double end half stripping and full stripping, single and double end twisting, single end tinning, double end tinning |
| Motor Brand | 7 set MITSUBISHI SERVO | 7 set INOVANCE CHINA BRAND SERVO |
| Cutting length | 10-830mm(longer or shorter cutting length can be customized) | 10-830mm(longer or shorter cutting length can be customized) |
| Stripping length | Standard front and rear blade distance 12mm (changeable blade distance: 15mm, 18mm, etc.) | Standard machine blade distance from front end is 8mm and rear end is 12mm |
| Processing wire gauge range | AWG32#-AWG16# | AWG32#-AWG16# |
| Twisting length(conductors) | 2-10.5mm(standard) | 2-10.5mm(standard) |
| Tinning depth(standard) | 0.5-10.5mm | 0.5-10.5mm |
| Production Rate | According to 100mm length, about 1300 times per hour, 6000-18000 pieces/hour, according to n mm length = single dip/double dip, 34m m=1850 times/1535 times; 30mm=1815 times/1480 times; 20mm=1735 times/1395 times; 15mm=1670 times/1320 times; 100mm=1350 times/1150 times; 200mm=1300 times/1100 times; 300mm=1280 times/1090 times; 400mm=1240 times/1060 times; 6 00mm=1160 times/1010 times; 800mm=1100 times/960 times; 32#-28# lines can make 10 lines at the same time; 26#-24# lines can make 8-9 lines at the same time; 22#-20# lines can make 6-7 lines at the same time; 18#-16# lines can make 4-5 lines at the same time; (the length of the line wire is different) | According to 100mm length, about 1300 times per hour, 6000-18000 pieces/hour, according to n mm length = single dip/double dip, 34m m=1850 times/1535 times; 30mm=1815 times/1480 times; 20mm=1735 times/1395 times; 15mm=1670 times/1320 times; 100mm=1350 times/1150 times; 200mm=1300 times/1100 times; 300mm=1280 times/1090 times; 400mm=1240 times/1060 times; 6 00mm=1160 times/1010 times; 800mm=1100 times/960 times; 32#-28# lines can make 10 lines at the same time; 26#-24# lines can make 8-9 lines at the same time; 22#-20# lines can make 6-7 lines at the same time; 18#-16# lines can make 4-5 lines at the same time; (the length of the line wire is different) |
| Power Supply | 220VAC,50Hz | 220VAC,50Hz |
| Air pressure | within 6kg | within 6kg |
| Transmission structure | Precision screw, guide rail, reducer | Precision screw, guide rail, reducer |
| Wire twisting methord | digital operation(motor drive method) | digital operation(motor drive method) |
| Dimensions | 1720*750*1400(mm) | 1720*750*1400(mm) |
| Weight | 400kg | 400kg |
| Auxiliary devices | horizontal and universal terminal leakage waste device/waste flux collection device/
waste rubber collection device/waste tin slag collection device |
horizontal and universal terminal leakage waste device/waste flux collection device/
waste rubber collection device/waste tin slag collection device |
| Detection functions | the lack of wire detection, wire knotting detection,
air pressure detection,crimping force detection |
the lack of wire detection, wire knotting detection,
air pressure detection,crimping force detection |