Four-core sheathed power cable stripping crimping machine
SA-HT400 Design for 3-4 core sheathed power cable stripping crimping machine ,Machine can cutting Multi core into different length, The length drop is 0-200mm,stripping and crimping different terminal , you only need put the wire into machine fixture , Machine will cutting stripping and crimping different terminal automatically , This machine is usually used in the power cable processe,which can greatly improve working efficiency and and save labor
1. Mitsubishi servo: 3 servo motors for the whole machine , so that the positions of wire feeding, peeling and crimping are very accurate
2. Applicable terminals: insulation ring Terminal ,87/250 terminal , flag terminal or pre-insulation Terminal ,horizontal terminal can be modified
3. English Touch screen operation, Cutting length and stripping length can directly setting on machine,Very easy to operate
4. Different cutting length: Machine can do different cutting length of Multi core, The length drop is 0-200mm
| Model | SA-HT400 |
| Capability | 4-core cable: 550-600pcs/h |
| 3-core cable: 800-900pcs/h | |
| Applicable wire range | 3-core or 4-core sheathed cable |
| Cutting length difference | 0-200mm |
| Cutting tolerance | within ±0.1（0.1+0.005*L）mm, L=cutting length |
| Stripping length | 0-15 |
| Crimping force | 3T |
| Crimping mode | frequency converter drive, AC motor |
| Power supply and air pressure | 3 phase 220V, 50/60Hz,0.5Mpa, 150(ANR)/min |
| Dimensions | L1500mm x W970mm x H1700mm |