Product Features
SA-LK6300
Equipped with dual printing units, it prints identification marks on both ends of the marker tubes at once. Six independent wire feeding stations support continuous production of different wire specifications. Three servo silent crimping units realize flexible crimp modes including double-end crimping, single-end crimping and non-crimping. This machine supports automatic switching among 3 types of marker sleeves. It works with 12 kinds of loose terminals and 1 tape terminal, compatible with IT, UT, OT, cold crimp terminals and chain terminals, with custom terminal support available. It greatly reduces manual work, saving 6–8 workers for mass wiring production.
Bullet Points
✅ Dual printing units for simultaneous marking on both ends
✅ 6 wire feeding stations for multi-spec wire production
✅ 3 servo silent crimping units, flexible crimp combinations
✅ Automatic switching of 3 marker sleeve types
✅ Wide terminal compatibility: loose terminals, tape terminals & chain terminals
✅ Multiple processing modes: double crimp, single crimp, no crimp, wire flattening
✅ Built-in detection: low material alert, wire tangling alarm
✅ Stable output speed: 500 ± pcs/h
✅ User-friendly industrial control all-in-one panel
| Modle | SA-LK6300 |
| Wire Range | 0.5mm² – 4.0mm² BVR wire |
| Marker Sleeve Types | 3 types, automatic switching |
| Production Speed | 500 ± pcs/h |
| Wire Length Range | 300 – 9999 mm |
| Stripping Length | 5 mm – 20 mm |
| Control System | Industrial control all-in-one machine |
| Detection Function | Material shortage, wire tangling detection |
| Feeding Stations | 6 standard feeding stations |
| Printing Unit | Dual printing units |
| Crimping Unit | 3 servo silent crimping units |
| Marker Tube Length | 15–35 mm (customizable upon request) |
| Marker Tube Direction | Freely adjustable |
| Terminal Processing | Single / double crimp, no crimp, wire flattening |
| Supported Terminals | 12 loose terminal types + 1 tape terminal; IT, UT, OT, chain terminals available |
| Air Requirement | 0.5–0.7 Mpa, 130–180 Nl/min |
| Power Supply | AC220V, 50HZ |
| Working Temperature | 10°C – 35°C (20°C recommended) |